麒麟电子

 找回密码
 请用中文注册用户!

QQ登录

只需一步,快速开始

查看: 242|回复: 0

灰度科技手机使用说明书英文版

[复制链接]
笑问天 发表于 2021-1-31 12:50:00 | 显示全部楼层 |阅读模式

注册登录后可以在线提问,行业从业者将帮助您解答!

您需要 登录 才可以下载或查看,没有帐号?请用中文注册用户!

x
灰度科技手机使用说明书英文版
 


System:Android, iPhone

Scanthe QR code on the right to download; or search “LedArt” in Google Play Store; iPhone search “LedArt” in the APP Store.

图片

02Wi-Fi connection


Turnoff the mobiledata/ Bluetooth of the phone, turn on the WLAN in thephone setting, and connect to card’s Wi-Fi.


图片

03

Check if the device is online




Asshown, click "Device", you can see the device informationindicating that the device is online.


图片


04Create new screen (program)


Clickthe “program”→“new display”→select the device→“add”→setthe width and height of screen→select the color→select the graylevel→“OK”


图片


05Edit and send the program



图片


Afterthe program is sent, if the screen shows normal, then don’t need donext step(Hardware setting).


06Hardware setting


Click“Device”→“Hardwaresetting”,password is 888→select the configuration file→“OK”


图片


The third step, if do not know which scan need to choose,pleasecheck the list of Configuration file of module.

图片

Data-H is the Data polarity is high and L is low, OE-L is the OE polarity islow and H is high.


Note

1) If black text on a red background, the data polarity is set inreverse;


2) If the text is dark, the OE polarity is set inreverse;


3) If the configuration file don’t work, please do smart setting.




FAQ
Q1:How to add multiple programs?

Exitprogram editing, return to the program list, add multiple programs,and edit the programs before sending them together.


图片

Q2:What should we do if forget the Wi-Fipassword?

1)If the controller’s firmware is V4.24 or above, when the controller is powered on, long press the button (S1) for 10 seconds, the password will be restored to the default 88888888;


2) If the firmware of the controller is below V4.24, need to reset the controller, the steps are as follows:
Step1.Power off the controller and find the button (S1);
Step2.Press and hold the button, and power on the
controller (Do not lose the button);
Step3.After power on for 10 seconds, release the button.The password will be restored to the default 88888888, but the screen parameters may also be modified.

Q3:How to set the text to be displayed onmultiple lines?

Bydefault, the text will be automatically adjusted following the textarea. Only need to modify it to a fixed fontsize to display multiple lines.


图片

Q4:How to set text rotation?

Inthe lower part of software, press and swipe up to find "Textrotation" setting. Then choose the rotation degrees you want.


图片

Q5:How to set partition display?

Click "+" to add a new text area, and hold the blue mark dots "图片"and "图片"in the analog display area. Then drag it to zoom in or out the area.Hold the area and move to adjust it's position.


图片

Q6:When Wi-Fi connected but no device online, howto do?
  1. Turn off mobile data, Bluetooth, VPN and so on;

  2. When Wi-Fi is connected and there is a message from your phone: Current WLAN cannot access the Internet and there are other WLAN networks can be connected normally, do you want to switch? Choose "Keep".

    图片


User manual suitable for single color LED Wi-Fi control card.


Single  Color LED Wi-Fi Controller

W Series

WFSeries

W00W02W03W04

WF1WF2WF4

W60W60-75W6BW62W62-75W63W64W66


本版积分规则

 
 
在线客服
在线客服
点击这里给我发消息
点击这里给我发消息
客户交流咨询:
led麒麟电子交流群
舞台字幕咨询:
舞台字幕机舞台字幕卡
工作时间
8:50-18:00
官方微信扫一扫

QQ|返回首页|有问题扫码关注公众号|LED控制卡 ( 鲁ICP备18053106号 鲁公安网备案号37170202666047 ) keywords:LED显示屏 LED控制卡 LED显示屏配件 麒麟电子

GMT+8, 2021-4-21 18:56

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表